NC Index Table (Pneumatic Lock)
     
                單位:mm  

MODEL

TD-170P TD-200P(-V) TD-255P(-V)
 Stand method Vertical and Horizontal Vertical and Horizontal , (-v) only for vertical
 Lock System 5 kg/cm2 5 kg/cm2
 Table dimension Φ160 mm Φ210 mm Φ225 mm
 Table Center Hole Diameter Φ35 mm Φ40 mm Φ80 mm
 Table Center Hole Diameter Φ50 H7 mm Φ50 H7 mm Φ80 H7 mm
 Center Height of Vertical Position 135 mm 160 mm 160 mm
 Table T-Slot Width D12 H7 mm D12 H7 mm D12 H7 mm
 Standard guide block Width D14 H7 mm D14 H7 mm D18 H7 mm
 Servo Motor (FANUC series) α3 /α4i α3 /α4i α6 /α8i
 Servo Motor (MITSUBISHI series) HF53T/ HC052 HF53T/ HC102 HF103T/ HC152(102)
 Gear Ratio 1/90 1/90 1/180
 Total speed (Motor 2000rpm) Rotation Speed 22.2(0.87) 22.2(0.87) 11.1(0.44)
 Total speed (Motor 3000rpm) Rotation Speed 33.3(1.31) 33.3(1.31) 16.7(0.66)
 Minimum input increment  0.001° 0.001° 0.001°
 Indexing accuracy (accumulative ) 20 20 20
 Repetitive accuracy  4 4 4
 Clamping force 8 kgf/m 16 kgf/m 45 kgf/m
 Clamping Torque force 27 kgf/m 27 kgf/m 48 kgf/m
 Vertical  Load Capacity (Tailstock used) 75 kg / 150 kg 75 kg / 150 kg 100 kg / 250 kg
 Horizontal Load Capacity  150 kg 150 kg 250 kg
 Net Weight (Non-motor Weight) 42 kg 50 kg 150 kg
 
 
 
Copyright 2007 © Yan Chain All Rights Reserved.