NC Index Table (Hydraulic lock)
     
                單位:mm  
Model TD-255H(-V) TD-320H(-V) TD-400H(-V)
 Stand method

Vertical and Horizontal , (-v) only for vertical

 Lock System

35 kg/cm2

 Table dimension Φ250 mm Φ320 mm Φ400 mm
 Table Center Hole Diameter Φ43 mm Φ43 mm Φ43 mm
 Table Center Hole Diameter Φ50 H7 mm Φ40 H7 mm Φ40 H7 mm
 Center Height of Vertical Position 160 mm 210 mm 255 mm
 Table T-Slot Width D12 H7 mm D14 H7 mm D14 H7 mm
 Standard guide block Width D18 H7 mm D18 H7 mm D18 H7 mm
 Servo Motor (FANUC series) α6 /α8i α12 /α12i α12 /α12i
 Servo Motor (MITSUBISHI series) HF103T/ HC152(102) HF203T/ HC202 HF203T/ HC202
 Gear Ratio 1/180 1/180 1/180
 Total speed (Motor 2000rpm) Rotation Speed 11.1(0.44) 11.1(0.44) 11.1(0.44)
 Total speed (Motor 3000rpm) Rotation Speed 16.7(0.66) 16.7(0.66) 16.7(0.66)
 Minimum input increment  0.001° 0.001° 0.001°
 Indexing accuracy (accumulative ) 15 15 15
 Repetitive accuracy  4 4 4
 Clamping force 50 kgf/m 85 kgf/m 180 kgf/m
 Clamping Torque force 48 kgf/m 78 kgf/m 180 kgf/m
 Vertical  Load Capacity (Tailstock used) 100 kg / 250 kg 150 kg / 150 kg 200 kg / 500 kg
 Horizontal Load Capacity  250 kg 350 kg 500 kg
 Net Weight (Non-motor Weight) 105 kg 175 kg 250 kg
 
 
 
Copyright 2007 © Yan Chain All Rights Reserved.